Description:

This is ob1 RC 4 Channel LED Light Kit System V3.1.


 

Feature:

  • For: RC Short Course / Monster / Truck / Crawler
  • 12 LED Connector:
    • FR1-2 (Front lamp)
    • BR1 (Brake lamp)
    • L1-2, R1-2 (Left & Right signals)
    • AUX1-2 (AUX lamp)
    • FOG (Fog lamp)
    • ROF (Roof lamp)
    • REV (Reverse lamp)
  • 1-4 Channels input
  • Auto-calibration on every power on >> Plug&Play !!
  • Main / Sub Unit design, uses 1 cable to connect each others
  • Support virtually all RC systems in market (High Response 2.4G System, PCM / PPM (FM), AM)
  • Powered by BEC of RC system, no external power required


 

Functions:

  • Steering (Left / Right winker lamp)
  • Throttle (2-level brightness brake lamp)
  • Auto hazard lamp
  • Reverse lamp
  • Manual hazard lamp
  • Flash mode Toggle
  • Front lamps On/ Off
  • Toggle function (Hold for 3 sec. to change LED status, total 4 Toggle steps !)


 

Special functions:

  • Reverse beep (Buzzer is required)
  • Low Voltage Detection (LVD), Buzzer uses as audible alarm
  • Flash mode (All LED), Press SET switch anytime (or use CH3) after power on to change total 7 flashing styles
  • FR2, AUX2, ROF connectors have 4 Power Options (Low/ Mid/ High / Extra High), 1 connector Max. can drive 16 LED (20mA) type. However if HIGH / EX-HIGH Power option used, external BEC is required


 

Specification:

  • Input Voltage: 5-6VDC (Powered by BEC), absolute Max. 9V
  • Low Voltage Detection battery type: 1-6S LiPo / LiFePo (User define Max. 25.2V)
  • Support RC System: All High Response 2.4G Systems / PCM / PPM (FM) / AM
  • Main Unit Size: 44mm (L) x 38mm (W) x 10mm (H)
  • Sub Unit Size: 22mm (L) x 22mm (W) x 10mm (H)
  • Main Unit Weight: 12g
  • Sub Unit Weight: 10g


 

Include:

  • Main Unit (1 pc)
  • Sub Unit (1 pc)
  • Main Cable (1 pc)
  • Set switch cable (1 pc)
  • Extend LED cable (1 pc)
  • Front LED cable (1 pc) (5mm Ultra high brightness WHITE LED x 2pcs)
  • Brake LED cable (1 pc) (5mm Ultra high brightness RED LED x 2pcs)
  • Left / Right LED cable x 2 (3mm high brightness YELLOW LED x 4pcs)
  • Left / Right LED cable x 2 (5mm high brightness YELLOW LED x 2pcs)
  • 2S battery cable (1 pc)
  • User Manual (English / Traditional Chinese) (1 pc)
  • Buzzer (1 pc)