General Specifications
Electronic Specifications
Main rotor diameter: 1136mm (with 500 mm blades)
HPS Head (FBL Only)
Main blade length: 470 to 500mm
Tail rotor diameter: 226 mm
Tail blade length: 80 mm
Main shaft diameter: 10 mm
Tail shaft diameter: 5 mm
Spindle shaft diameter: 8 mm
Gear Ratios 6.9-11 : 1
Weight including electronics: 1900 g (excluding flight battery).
18T motor pulley included (other pulley sizes available)
All pulleys are made for 6 mm motor shaft (5 mm motor shaft adapter included in kit)

Special Features:
Full carbon fiber boom
Quick release battery tray system
Sacrificial breaking point for landing gear and boom
Unique ¡°inside the boom¡± tail push rod design






• Cyclic Servos: Mini size (36mm)
Normal and 3D Flight: Hitec 5245 MG, Align DS510M or DS515M, Savox SH1250, Graupner DES 678 MG, MKS DS-9660A, Futaba 9650
HARD 3D: Futaba BLS153, Graupner HBS660 HV, JR DS3717 HV, HITEC 7245 MG HV, JR DS3711 HV

• Tail Servo: Standard size (40mm)

• Typical Speed Controller: 80/100A
Normal and 3D Flight: Kontronik Koby 90, YGE 100 LV

HARD 3D: Kontronik Jive 100 LV, YGE 120 LV, CC Talon 90

• Motors: (Max Diameter: 52 mm, Max Height: 52 mm)
Normal and 3D Flight: Scorpion HK-4015-1070, Quantum 4115-1200

HARD 3D: PYRO 600-1200, Scorpion, HKIII-4020-1100/1350, Quantum 4120-1200

• Flight Battery: (Max Dimensions: 52x53x180mm)
6S 2800/4500 mAh.
Kit Includes:

18T motor pulley (other pulley sizes available)
500 mm main blades
80 mm tail blades


The following motor pulleys are available:
16T Pulley (P/N 0215-16-S) Ratio 10.33:1
18T Pulley (P/N H0215-18-S) Ratio 9.18:1
20T Pulley (P/N H0215-20-S) Ratio 8.26:1
22T Pulley (P/N H0215-22-S) Ratio 7.51:1
24T Pulley (P/N H0215-24-S) Ratio 6.91:1

17T Pulley (P/N H0215-17-S) Ratio 9.72:1
19T Pulley (P/N H0215-19-S) Ratio 8.7:1
21T Pulley (P/N H0215-21-S) Ratio 7.87:1
23T Pulley (P/N H0215-23-S) Ratio 7.19:1

All these motor pulleys are for a 6 mm motor shaft. Each pulley includes an adapter for 5 mm motor shafts.

http://www.goblin-helicopter.com/shop/imagesdesc/keyfeas.jpg

http://www.goblin-helicopter.com/shop/imagesdesc/01.jpg
• Identical concept as Goblin 700
• Simple and effective design



• Carbon fiber boom for maximum rigidity



• HPS (High Precision Head System)
• 10mm high strength steel main shaft
• 8mm high strength steel spindle shaft
• Large tail pulleys for increased tail authority
• Dampened tail system for increased vibration tolerance

• Unique, extremely rigid transmission design
• Stiffness of the model defined by a single component
• Heat tolerant primary drive belt
• Carbon fiber tail push rod hidden inside the boom for an aesthetically pleasing, unique design


• Nylon bolt break-away system to preserve the boom during a crash


• Landing gear mounting brackets don¡¯t require bolts to be installed. The brackets are a break point during a crash preserving frames and other important parts
http://www.goblin-helicopter.com/shop/imagesdesc/gallery/09aa.jpg
• Quick release battery tray system


• Plenty of room for electronic components

• Mini size cyclic servos
• Direct and geometrically correct servo placement
• Standard size tail servo